Continuous beeping
-Hopper not locked in place (when brewing with whole beans)
• Check to see if the hopper container release knob is in the unlocked position
• Place the hopper container on the unit
• Turn the knob to the locked position
• Press On/Off or Program again to resume
-Filter door not closed
• Check to be sure that all components of the filter compartment are in place
• Close filter door (you will hear a click if the door is properly shut)
• Press On/Off or Program again to resume
-Filter basket not in place
• Open filter door by pressing the filter door release button
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if the door is properly shut)
• Press On/Off or Program again to resume
-Filter basket cover not in place
• Open filter door by pressing the filter door release button
• Put on cover, matching “grind” arrows
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if the door is properly shut)
• Press On/Off or Program again to resume
-Filter Basket not emptied of used grinds
• Open filter door by pressing the filter door release button
• Remove filter basket with cover
• Discard used grounds
• Replace filter basket with cover and close door
• Press On/Off or Program again to resume
Coffee is weaker than usual
-Coffee chute is clogged
• Remove the hopper from the unit
• Lift coffee channel cover
• Clean out coffee chute
• Replace channel cover and hopper
• Your coffeemaker is now ready to brew again
-Not enough beans in hopper
• Be sure there are enough beans in your hopper for the amount of coffee you intend to brew
-Strength setting is incorrect
• Check your strength setting — displayed on the LCD screen
• To change your strength settings press the strength control button